FTL load up screen turns white after loading

[HaloFlare]

Ok here it is...

------------------
System Information
------------------
Time of this report: 9/25/2012, 14:19:55
Machine name: JARROD-PC
Operating System: Windows Vista™ Home Premium (6.0, Build 6002) Service Pack 2 (6002.vistasp2_gdr.120402-0336)
Language: English (Regional Setting: English)
System Manufacturer: Acer
System Model: Aspire M5100
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2 CPUs), ~2.3GHz
Memory: 2814MB RAM
Page File: 1727MB used, 4134MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
DxDiag Version: 7.00.6002.18107 32bit Unicode

------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Sound Tab 3: No problems found.
Input Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
---------------
Card name: ATI Radeon X1250
Manufacturer: ATI Technologies Inc.
Chip type: ATI Radeon X1200 Series (0x791E)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_791E&SUBSYS_0E0A105B&REV_00
Display Memory: 1279 MB
Dedicated Memory: 255 MB
Shared Memory: 1023 MB
Current Mode: 1024 x 768 (32 bit) (60Hz)
Monitor: Generic PnP Monitor
Driver Name: atiumdag.dll,atiumdva.dat,atitmmxx.dll
Driver Version: 7.14.0010.0489 (English)
DDI Version: 9Ex
BGRA Supported: Yes
Driver Attributes: Final Retail
Driver Date/Size: 3/14/2007 09:42:50, 2759168 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71EE2-3A5E-11CF-0272-002EA1C2CA35}
Vendor ID: 0x1002
Device ID: 0x791E
SubSys ID: 0x0E0A105B
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_A ModeMPEG2_C
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled

<0 0< <0 0> >0 0> Kirby Dance DONE!!!!

[Matthew]

Excellent. Thank you for getting that

It looks like you currently have a Desktop resolution of 1024 x 768. Do you know if your monitor can have higher resolutions? FTL requires that you have at least 1280 x 720

Please try to update your video drivers by using Steam. Just click on "Steam" in the top left of your Steam window, then click "Check for Video Driver Updates." Picture below

dxdiag.png

Tomorrow I will be releasing a patch for FTL that will solve some video issues. Hopefully it will help you as well. This time tomorrow Steam should have automatically updated FTL, so try again then and let me know if it works.

[HaloFlare]

Ok I went there and it sent me to this website's page...

http://support.amd.com/us/gpudownload/Pages/index.aspx

[HaloFlare]

Hello me again Matthew!

Well I just got done loading your update butit still doesn't not work.
Also how much ram power do you need to play, becuase if i can run garry's mod fine im almost sure I can run this any help for this?


Sincely: HaloFlare

[Matthew]

Hello again!

Please keep the messages to this post. Posting more forums elsewhere will just confuse me and other people that can help, all of your relevant information is already here

Go to that link that you posted above and install new drivers. Just click on "Auto-Detect and Install"

drivers1.png

Then click "Download"

drivers2.png

And run the file that you download. It should walk you through and update your computer video card drivers

[HaloFlare]

Sorry for that im frantic my mind hurts with all this techical stuff...
Sorry agian, when it started to ask it said this coulkd harm my computer, was it a good idea to download it???

Sincerly: haloFlare

[Matthew]

That file from the AMD website will be safe, don't worry

[HaloFlare]

Ok it whats me to End User lisement agrrement it says at the top left corner, what do I do ?

[HaloFlare]

OK, I got done downloading the new Graphic card thing now what?

[HaloFlare]

OMG OMG OMG OMG OMG OPMG OMG OGM OMG





IT WORKS HAHAHAHAHAHAHYAHHAHA BUT WITH CRAPY GRAPHICS