Custom Ship Slot Swapper
Posted: Thu Oct 15, 2015 10:45 am
Something I made a while ago, but it works for all the ships now.
It's meant to move the custom ships you want to the slots you want them in; don't like the federation cruisers? With this, you can make your favourite custom ships replace them.
You can use multiple ships that originally go to the same slot, too.
Some screens:
http://imgur.com/a/DOFj5
IMPORTANT!
Use up-to-date version of Slipstream Mod Manager, at least 1.5.
Mod order:
ShipSwapStart
Your Custom Ship
ShipSwapTargetSlot
Your Custom Ship
ShipSwapTargetSlot
Your Custom Ship
ShipSwapTargetSlot
etc.
Place this whole mod (all the files listed above, including your custom ships) where you would normally place your ships in regard to your other mods, so most likely at the very end of your list. Try not to put any mods in between these files, generally, one ship mod = one ShipSwap mod (not including the Start one, which I haven't found a way around using).
If you want to use a custom ship and keep it in it's original place, you can put it before or after all of the above, but make sure you don't have a corresponding ShipSwapTargetSlot active, or it may overwrite your ship even if it's set earlier in the mod order.
This is especially true for mods with multiple ships, which will not work properly alongside this mod in any other way.
You don't need, and probably don't want to copy all the files from the 'ships' folder, just ShipSwapStart and the ships you want to be replacing.
Download Link:
https://dl.dropboxusercontent.com/u/182 ... ipSwap.zip
Dropbox says something about expiring public direct links in 2017, so also:
https://www.dropbox.com/s/aapsfjerw1d35 ... p.zip?dl=0
(This is an archive, you need to unpack it to get to the .ftl mod files.)
It's meant to move the custom ships you want to the slots you want them in; don't like the federation cruisers? With this, you can make your favourite custom ships replace them.
You can use multiple ships that originally go to the same slot, too.
Some screens:
http://imgur.com/a/DOFj5
IMPORTANT!
Use up-to-date version of Slipstream Mod Manager, at least 1.5.
Mod order:
ShipSwapStart
Your Custom Ship
ShipSwapTargetSlot
Your Custom Ship
ShipSwapTargetSlot
Your Custom Ship
ShipSwapTargetSlot
etc.
Place this whole mod (all the files listed above, including your custom ships) where you would normally place your ships in regard to your other mods, so most likely at the very end of your list. Try not to put any mods in between these files, generally, one ship mod = one ShipSwap mod (not including the Start one, which I haven't found a way around using).
If you want to use a custom ship and keep it in it's original place, you can put it before or after all of the above, but make sure you don't have a corresponding ShipSwapTargetSlot active, or it may overwrite your ship even if it's set earlier in the mod order.
This is especially true for mods with multiple ships, which will not work properly alongside this mod in any other way.
You don't need, and probably don't want to copy all the files from the 'ships' folder, just ShipSwapStart and the ships you want to be replacing.
Download Link:
https://dl.dropboxusercontent.com/u/182 ... ipSwap.zip
Dropbox says something about expiring public direct links in 2017, so also:
https://www.dropbox.com/s/aapsfjerw1d35 ... p.zip?dl=0
(This is an archive, you need to unpack it to get to the .ftl mod files.)